User`s manual

Alcorn McBride Binloop User’s Manual Page 54
Binloop Menu
The next selection in the main window is Binloop. It contains two groups
containing selections called Settings…, SMPTE…, Reproducer, and
Download to Binloop and Upload to Binloop. Each of these selections is
explained in what follows.
Settings…Unit…
Reproducer Card Slots
Many previous generations of
Binloop products are
supported by the Binloop
Software.
The Unit Configuration window permits the user to select the number
of reproducers in the Binloop. The Digital Binloop and Video Binloop
both have 16 slots.
Control Port Protocol
The Control Port Protocol determines the protocol that is used on the
Show Control Port. This settings can be either Alcorn Show
Control(Alcorn 9-bit), MIDI, ASCII (Pioneer/AMI), and Debug. For more
information on these protocols, please refer to the Control Protocols
section of this manual.
Unit Number
The Unit Number is the device address used for the MIDI protocol and
when addressing multiple units.
Unit Groups
You can place the Binloop into a Group with other Binloops and address
them as a single group. The Unit Groups selects which groups this
Binloop is a member of.