User`s manual

Alcorn McBride Binloop User’s Manual Page 40
Stop Independent (Audio Only)
Description: This command stops independent playback on the specified channel.
Command: aaacSI
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
c is an ASCII character representing the channel
L – Left Channel
R – Right Channel
Response: R
Get/Set Video Colorspace
Description: This command configures the colorspace of the analog component video output
of the specified reproducer(s).
Parameters: n is a number between 0-1 that represents the colorspace setting
0 – RGsB
1 – YPbPr
aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Get Command: aaaVC
Response: n
Set Command: naaaVC
Response: R
Example: Set Reproducer #1 to YPbPr colorspace: 1R1VC
Set Reproducer #1 to RGsB colorspace: 0R1VC