User`s manual

Alcorn McBride Binloop User’s Manual Page 39

Play Independent (Audio Only)

Description: This command causes the specified mono audio file to be played on the specified

audio channel. If a video file is playing, or an audio file is playing ‘normally’ on

both channels, playback of that file will be interrupted. If a file is being played

independently on the opposite channel, it will not be interrupted.

Command: nnnnaaacPI

Parameters: nnnn is an ASCII file number between 0-1023

aaa is the address of the card(s) you want to process the command

Rxx – Reproducer address between R1-R16

Gxx – Group address between G1-G13

* - Wildcard address for all reproducers

c is an ASCII character representing the channel

L – Left Channel

R – Right Channel

Response: R

Example: Play File #2 on Left Channel of Reproducer 1: 2R1LPI

Loop Independent (Audio Only)

Description: This command functions exactly like the Play Independent command except that

the file loops after it finishes playing.

Command: nnnnaaacLI