User`s manual

Alcorn McBride Binloop User’s Manual Page 37
Stop Playback
Description: This command will stop currently playing clip. If a video was playing, the last
frame that was displayed will remain on screen.
Command: aaaRJ
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Examples: Stop Reproducer #1: R1RJ
Stop Group #2: G2RJ
Stop All Reproducers: *RJ
Still Playback
Description: This command will pause the currently playing clip at its present position. If a
video was being played, the stilled video frame will remain on screen.
Command: aaaST
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Example: Still Reproducer #1: R1ST
Resume Reproducer #1: R1PL
Pause Playback
Description: This command works exactly like the Still command except that the video output
will mute to black while the video is paused. When the Play/Resume command
is used after this command, the video is unmuted and restored automatically.
Command: aaaPA
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Example: Pause Reproducer #1: R1PA
Resume Reproducer #1: R1PL