User`s manual

Alcorn McBride Binloop User’s Manual Page 34
Play Clip
Description: This command will play the specified clip on the addressed reproducer card(s).
Playback starts as soon as possible after the command is received.
Command: nnnnaaaPL
Parameters: nnnn is an ASCII file number between 0-1023
aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Comments: Since playback starts as quickly as possible once this command is received, it
should never be used for synchronous playback. For this, you should use the
Synchronous Play command for a consistent synchronized start of playback.
Using a Search command along with a timed Play/Resume command works well
for synchronous playback too.
Examples: Play File 3 on Reproducer #1: 3R1PL
Play File 4 on Group #2: 4G2PL
Play File 52 on All Reproducers: 52*PL
Play/Loop Clip
Description: This command functions exactly like the Play Clip command, except that the
video loops once the end of the clip is reached.
Command: nnnnaaaLP
Parameters: nnnn is an ASCII file number between 0-1023
aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Examples: Loop File 3 on Reproducer #1: 3R1LP
Loop File 4 on Group #2: 4G2LP
Loop File 52 on All Reproducers: 52*LP