User`s manual

Alcorn McBride Binloop User’s Manual Page 31
Get/Set SMPTE Restart Mode
Description: This command will get or set the current SMPTE restart mode.
Parameters: x = mode number:
0 = SMPTE restart is Disabled on power up
1 = SMPTE restart is Enabled on power up
Get Command: RM
Response: x
Example: Command: RM
Response: 1
Set Command: xRM
Response: R
Example: Command: 1RM
Response: R
Get/Set SMPTE Idle Mode
Description: This command will get or set the current SMPTE idle mode.
Parameters: x = mode number:
0 = SMPTE output is active when idle
1 = Mute SMPTE output when idle
Get Command: IM
Response: x
Example: Command: IM
Response: 1
Set Command: xIM
Response: R
Example: Command: 1IM
Response: R