User`s manual

Alcorn McBride Binloop User’s Manual Page 28
Get/Set SMPTE Frame Rate Mode
Description: This command will get or set the SMPTE frame rate.
Parameters: x = mode number:
0 = 23.976 fps
1 = 24 fps
2 = 25 fps
3 = 29.97 fps
4 = 30d fps
5 = 30 fps
Get Command: FR
Response: x
Example: Command: FR
Response: 5
Set Command: xFR
Response: R
Example: Command: 5FR
Response: R
Get/Set SMPTE Preroll time
Description: This command will get or set the SMPTE preroll time.
Parameters: hh = hours
mm = minutes
ss = seconds
ff = frames
Get Command: PT
Response: hh:mm:ss.ff
Example: Command: PT
Response: 00:01:30.10
Set Command: hh:mm:ss.ffPT
Response: R
Example: Command: 00:01:30.10PT
Response: R