User`s manual

Alcorn McBride Binloop User’s Manual Page 25
Get/Set Subnet Mask number
Description: This command will get or set the number used to isolate the subnet.
Parameters: xxx.xxx.xxx.xxx is a standard IPv4 subnet mask.
Get Command: SM
Response: xxx.xxx.xxx.xxx
Example: Command: SM
Response: 255.255.255.0
Set Command: xxx.xxx.xxx.xxxSM
Response: R
Example: Command: 255.255.255.0SM
Response: R
Get/Set Gateway address
Description: This command will get or set the IP address of the network gateway.
Parameters: xxx.xxx.xxx.xxx is a standard IPv4 IP gateway address.
Get Command: GW
Response: xxx.xxx.xxx.xxx
Example: Command: GW
Response: 192.168.0.1
Set Command: xxx.xxx.xxx.xxxGW
Response: R
Example: Command: 192.168.0.1GW
Response: R