User`s manual

Alcorn McBride Binloop User’s Manual Page 24
Get/Set Unit ID
Description: This command will get or set the unit ID number.
Parameters: xx represents a decimal number between 1 – 49.
Set Command: xxID
Response: R
Example: Command: 1ID
Response R
Get Command: ID
Response: xx
Example: Command: ID
Response: 1
Get/Set IP address
Description: This command will get or set the unit IP address.
Parameters: xxx.xxx.xxx.xxx represents a standard IPv4 IP address.
Get Command: IP
Response: xxx.xxx.xxx.xxx
Example: Command: IP
Response: 192.168.0.254
Set Command: xxx.xxx.xxx.xxxIP
Response: R
Example: Command: 192.168.0.254IP
Response: R