User`s manual

Alcorn McBride Binloop User’s Manual Page 121
18. In the Firmware Update window of the Binloop software,
select DBAP4 SMPTE Module as the component to
update.
19. Click the Check button and verify that the Binloop
responds with “SMPTE Vx.xx”.
20. Click the Browse button and browse to the folder
extracted in step #2. Select the SMPTECOR.HEX file
and click Open.
21. Click on the Update button at the bottom of the window
and wait for the update to complete.
You have now successfully updated the Control System and the
SMPTE Interface of the DBAP4 controller card to the latest
versions.