User`s manual

Alcorn McBride Binloop User’s Manual Page 107
Data2 – The Play event uses this parameter to identify which
card (or cards) to command to play. This event allows you to
command a single reproducer (R1-R16), a group of reproducers
(G1-G13), or all reproducers (All). Enter R1 in this column to
specify Reproducer #1.
Data3 – The Play event uses this field for the video clip number.
Reproducers can have multiple clips stored on their Compact
Flash cards, so it’s important to specify which clip to play. Enter
the number 1 in this field.
We have now created an event that will command the Binloop to
play file #1 on Reproducer #1 as soon as the PlayFile sequence
is started. You can now close the PlayFile Event list, and return
to viewing the Sequence list.
Downloading the Script to the Show Controller
Our script is now finished and ready to compile and download.
Start by clicking on the icon in the menu bar, or by selecting
File

Compile Script and Download. The script is then
compiled and checked for errors. If no errors are found the
screen will look like this.