User`s manual

Alcorn McBride Binloop User’s Manual Page 104
Before modifying the new script, click on File

Save to give it a
descriptive name and store a copy of the script on your PC. For
this example, we will save our script as Interactivator-Binloop.
Port Configuration
Next, we need to tell WinScript that a Binloop is connected to
Port 1 of the show controller. Click on Resources

Ports to
bring up the port configuration. Start by changing the name of
port1 to Binloop so that we can easily identify this connection in
the script programming. Next, right-click in the Protocol column
of the Binloop port and select Protocol Wizard. The following
screen will appear, prompting you to select the protocol for the
device connected to this port.
Select Alcorn_McBride_Video_Binloop_(32_Track) from the
list and click OK. The Port Configutation should look like this
when finished.