User`s manual

Alcorn McBride Binloop User’s Manual Page 100
Trigger List
Now we have the important configuration screens set up, we
need to add a Play trigger to the trigger list. This trigger will
command the reproducers to play a video at the time we specify.
To create a new trigger, click the Add button at the top left of the trigger
list window. The following window will appear.
First, we need to enter the SMPTE time when we want this
trigger to occur. Enter 01:00:00.00 in the Time box. Select Play
as the Action, and make sure the Loop option is disabled. In
the Location box, select All Reproducers. Next, verify that the
Segment is set to 1 (this assumes that you have named your
video as video #1, as instructed in the Playing a Test File
section). Click on OK to add the trigger to the trigger list.