User`s manual

Alcorn McBride Binloop User’s Manual Page 96
Audio
Formats: MPEG-1 Layer I/II, MPEG-2 Layer II, WAV*,
AIFF*, Raw PCM*
Digital Outputs: AES/EBU or S/PDIF
Unbalanced Outputs: +4 Volts Maximum into 20K
Balanced Outputs: +8 Volts Maximum into 150 ohms (+20dBm)
Output Impedance: DC Coupled, less than 10 ohms
Quantization: 16-bit, 24-bit**
Dynamic Range: 104 dB
Sample Rate: 32kHz, 44.1kHz, 48kHz, 96kHz**
Frequency Response: DC - 20,000 Hz +/- 0.5 dB
Signal-to-Noise: 120 dB Below Full Scale when muted
THD+N: -97dB
Track Skew: Less than 100 nanoseconds
Sync Format: NTSC at 29.97 Hz, or PAL at 25 Hz
* Supported for Audio playback only (no video)
** Only supported by the Repro24D reproducer card installed in
the Digital Binloop HD.
SMPTE
Frame Rates: 23.976, 24, 25, 29.97, 30-drop, or 30
Trigger Skew: 23 µSec max
Lock Range: +/- 20%
Timing Stability: 7 ppm
Dropout Tolerance: Configurable (None, Infinite, or 1-8 seconds)
Input: Transformer Isolated
Input Impedance: 600Ω balanced
Output: Balanced 2-10 VPP selectable 0dBV to +4dBV
selectable
Output Impedance: 10Ω maximum
Load Impedance: 10KΩ