Specifications

DDP User’s Manual rev.0
Firmware version V1.4
17
5. Operation ____________________
Delay
Back
Returns to the setup channel1/2 menu.
On/Off
Switches the delay on or off without changing the entered delay time.
..ms/m
Enters the delay time in milliseconds (ms) or in meters (m) in steps of 0.1 ms
or 0.01 m for values up to 29 ms or 9.7 m and in steps of 1 ms or 0.1 m
above these values. The maximum values that can be entered here are
293 ms or 99.6 m. In absolute delay mode, these numbers are increased
with 1 ms or 0.3 m. The entered value becomes the actual delay time only
after confirmation by pressing the encoder.
Unit: ms/m
Toggles between units milliseconds (ms) or meters (m).
DDP relative/absolute
Toggles between relative and absolute indication of the delay time. Relative
mode shows the delay time relative to the delay off mode. Absolute mode
shows the delay time including the latency of the A to D and D to A
converters.