Specifications
DDP User’s Manual rev.0
Firmware version V1.4
13
5. Operation ____________________
Setup menu
In the setup menu, all the necessary settings for controlling the signal
processing of the DDP can be made.
Back
Returns to the main menu.
Setup channel1/2
Enters the menus in which the Alcons loudspeaker system presets, the input
routing, the equalisers and the delay function are controlled.
User presets
Enters the user presets menu. In this menu you can store and recall up to 99
of your own user defined presets.
Dual channel mode/Stereo mode/Bridged mono mode
This menu item switches the DDP between ‘Dual channel mode’, ‘Stereo
mode’ and “Bridged mono mode’.
In ‘Dual channel mode’, you can use the amplifier as two independent mono
amplifiers.
In ‘Stereo mode’, The DDP copies all channel1 settings to channel2 and
switches to a single control in the main menu. In this mode the power limiters
of channel1 and channel2 are linked to preserve stereo imaging.
In ‘Bridged mono mode’, The amplifier becomes a single channel amplifier
with double output voltage swing.
Link EQ/Delay
In ‘Dual channel mode’, you can choose to link the equaliser and/or the delay
function.