Specifications

DDP User’s Manual rev.0
Firmware version V1.4
10
5. Operation ____________________
Powering the amplifier
When the ALC amplifier is switched on, the DDP comes up with its boot
screen:
In the boot screen the Alcons logo, the device name and the current
firmware version are displayed.
After approximately 2.5 seconds the module automatically switches to the
main menu.
Pushing the DDP encoder while switching on the amplifier, makes the DDP
start-up with both channels muted.
Operating the encoder
The encoder is a multi-functional switch, which can be turned to select and
pushed to enter or exit a menu, or to confirm a setting. Turning the encoder
clockwise moves the cursor/selection down, turning counter-clockwise
moves the cursor/selection up.
Cursors
The filled cursor is displayed when the selected item can be accessed or
modified by pushing and/or turning the encoder.
The non-filled cursor is displayed when the selected item cannot be
accessed or modified by pushing and/or turning the encoder.