User guide

of the cable or connector should be done by a qualified ALCON service

center.

6.When securing the coaxial cable, we recommend you turn the coaxial cable

once to make a small loop (about 15 to 25 cm in diameter) near the

antenna support to prevent excessive load from the cable on the antenna

connection and to protect the coaxial cable and antenna connection from

being damaged when accidentally pulled. See illustration for more details.

STANDARD OA-2538 HIGH GAIN ANTENNA :

1. Hi Gain Antenna x 1 2 sections

2. Antenna Support x 1 including 3 screws

3. U-Clamps x 2 (including their respective screws)

4. Antenna Brackets x 2 (including their respective screws)

5. Antenna Reflector x 3

6. Glue

7. Mini L-Wrench and Small Combining Screw

Washer

Coaxial Cable

U - Clamps

Screw

Antenna Support

Antenna Mast

U - Clamp

Tape

Loop (25 cm)

Bracket