User's Manual Part 5

8065751131 5.3
Table 5-1. Advisory Messages
Message Displayed Condition Action
“Unable to recognize probe type in
Port XX.
Please select probe type from
options below.”
An unidentifi ed fi ber is connected
to a laser port. The laser fi ber may
not include a RFID tag or the tag’s
data may be corrupted.
User must select a probe type (slit
lamp, LIO, or Endo) to clear the
message.
“Please Insert Probe.
Select the Main Menu button to
view or alter settings.”
Unit completes boot-up and no
probe has been inserted.
User must connect a fi ber to a
laser port or select the Main Menu
button to clear the message.
“Maximum Power Available: 1.5W”
(any number under 2W will be
displayed; in this case it is 1.5W)
Power available from the laser
drops below the maximum level (2
Watts).
User must acknowledge the
screen prompt to clear the
message.
“Requested Power Not Available”
The operator depresses the
footswitch, but the laser is
unable to deliver the power value
requested.
User must acknowledge the
screen prompt to clear the
message. User should then
reduce laser power.
“Service Engine Soon” The laser has a signifi cant
drop in its maximum power or
system detects other potential
maintenance need.
User must acknowledge this
prompt to clear the message. If
the service has not been done,
the message repeats with every
boot-up.
"Footswitch side switches control
power to laser."
Message is displayed at boot
up to inform the user that the
footswitch side switches are set to
adjust power only.
User must acknowledge this
prompt to clear the message.
"Footswitch side switches may be
used to change from Standby to
Ready and back."
Message is displayed at boot up to
inform the user that the footswitch
side switches have been set to
switch between Standby and
Ready.
User must acknowledge this
prompt to clear the message.
"Footswitch side switches have
been de-activated."
Message is displayed at boot
up to inform the user that the
footswitch side switches have
been de-activated.
User must acknowledge this
prompt to clear the message.