User's Manual Part 5

5.2
8065751131
Error Messages
Errors are major faults in the system that cannot be resolved by either software,
hardware, or user action. The following events take place:
• The laser is placed in a safe state (laser engine is turned off and shutter is closed).
• The user is told by an error message and voice confi rmation that a fault has taken place.
• The front panel controls are not functional other than the emergency shut-off switch and
the On/Off key. The footswitch controls are also not functional.
An error message is usually an indication that the system requires service in order
to correct the problem. If restarting the system does not resolve the problem, contact
your local Alcon representative to schedule a service call.
Figure 5-1 Error Message