User's Manual Part 5
6.12
8065751131
Alcon
LIO-AT Icons and Labels
The labels and icons shown in Figure 6-10 are found on the Alcon LIO-AT and are defi ned as
indicated.
Figure 6-10 Alcon LIO-AT Labeling
532 nm
542-1476-001REV
CE Identification Label
Refer to Operator's Manual
Laser Radiation
Laser Aperture
Use appropriate take-back
system (See Environmental
Considerations in this manual)
No Continuous Use of LIO-AT;
10 Minutes ON/20 Minutes OFF.
Manufacture Date
Fragile - Handle Laser Fiber
With Care
cUL-UL Identification Label
Table 6-3 Alcon
LIO-AT Technical Specifi cations
SPECIFICATION
Width: 22.0 cm (8.7 inches)
Length: 24.2 cm (9.5 inches)
Height: 20.0 cm (7.9 inches)
571 g (1.26 lbs.)
See Heine power supply documentation.
Operating: Temperature: 15º C≤ Tº ≤ 35º C
Relative Humidity: 10% to 90% with no condensation
Storage: Temperature: -40º C≤ Tº ≤ 70º C
Relative Humidity: 10% to 90% with no condensation
EyeLite
®
Laser complies with CE MDD requirements (CE 0123).
®
Laser complies with CE MDD requirements (CE 0123).
®
Not suitable for use in the presence of fl ammable anesthetic, oxygen, or
nitrous oxide.
System not protected against the ingress of water.
Class IIb,
IEC 601-1
CATEGORY
Dimensions
Headset Weight
Electrical characteristics
Environmental Limitations
Miscellaneous