User's Manual Part 3

3.8
8065751131
Ready State
Footswitch depressed;
bottom menu changes to
red background with "Laser
On" displayed; shot count is
increased.
Figure 3-4 Transition from Ready State to Laser On
Figure 3-3 Transition from Standby to Ready Mode
Standby Mode
Ready button pushed,
display blinks from
green to gray for 2
seconds
Ready Mode
WARNING!
Do not proceed if aiming beam does not turn on.
4.4 Press the footswitch when ready to fi re. The system emits a tone each time the
laser fi res. Figure 3-4 shows the display transition from Ready State to Laser
On. If the footswitch is not pressed within a period selected by the user from
entry into ready mode, the system switches back to Standby mode.
NOTE: The aiming beam turns off when the treatment beam fi res, except in
Repeat Mode.