User's Manual Part 2

2.18
8065751131
System Messages
The System Messages display shown in Figure 2-23 contains
a scrolling list of system messages that have been logged
since the system delivered from the factory or was last
factory serviced and a new laser engine installed. System
Messages are defi ned as error, warning, or informational
messages that have been displayed to the user. The latest
message is displayed at the top of the list and the remaining
are listed in descending order.
System Totals
The System Totals display consists of two information items,
Session Totals and Cumulative Totals as shown in Figure
2-24.
Session Totals
Session Totals is the number of shots and the amount of Total
Energy delivered since the system was powered up.
Cumulative Totals
The Cumulative Totals displays the cumulative totals of
the listed treatment values. "Laser On" is the total time that
the laser engine has been powered up. This is equivalent to
the cumulative time the system has been in Ready mode.
"System On" is the total time the laser system has been powered up since it was
manufactured.
RESET TO FACTORY DEFAULTS
Selecting Reset to Factory Defaults from the Main Menu
displays the screen shown Figure 2-25. This screen allows
the user to re-set the system to the factory default settings.
Since this action changes many of the settings, the user
is prompted with an “Are you sure?” message before the
default settings take effect.
Selecting “Yes” will reset all factory settings to the original
settings and return the user to the Main Menu. “Cancel” will
cancel the operation and return to the Main Menu with the
settings unchanged.
Figure 2-23
System Messages
Figure 2-24
System Totals
Figure 2-25
Reset to Factory
Defaults Display