User's Manual Part 2

8065751131 2.15

Footswitch Settings

Selecting the Footswitch Settings menu item from the

Settings menu displays the Settings - Footswitch menu as

shown in Figure 2-16. This menu provides three settings

that allow the user to select the functionality of the side

switches.

NOTE: If the footswitch is not a multi-function

footswitch, the only functional setting is "Disable."

Power Control Only

This selection allows the side switches to increment (left

switch) or decrement (right switch) the treatment laser

power.

Power And Ready <-> Standby

When this selection is enabled, the user can transition from Standby to Ready by

pressing and holding the right side switch longer than 1.5 seconds until a tone sounds.

Similarly, pressing and holding the left side switch longer than 1.5 seconds (until a

tone sounds) will transition the system from Ready back to Standby.

Pressing the side switches for intervals shorter than 1.5 seconds will increase or

decrease treatment laser power.

Disable

This setting disables the side switches entirely so the footswitch can only be used

for ﬁ ring the laser. When this setting is selected, power control and switching from

Standby to Ready mode can only be done from the front panel of the system.

Selecting Back returns the system to the Settings Menu, while selecting Done returns

the system to the operation display.

Languages

Selecting the Languages Setting displays the languages

available to the user for displaying the information on the

screen. To select a language, rotate the Menu knob until

the desired language is chosen, then press the Menu knob

to select the highlighted item. Select Back to return to the

Settings Menu or Done to return to the operating display.

The text displayed on the LCD will reﬂ ect the new language

setting.

Figure 2-16

Footswitch Settings

Figure 2-17

Language Settings