User's Manual Part 2

2.14
8065751131
Contrast
The Contrast menu allows the user to change the contrast
setting of the displays. When selected, the screen shown in
Figure 2-14 is displayed and rotating the Menu knob adjusts
the screen contrast. After the display has been adjusted to the
desired contrast, pressing the Menu button returns the display
back to the Settings screen.
Fiber Custom Settings
The Fiber Custom Settings menu allows the user to set and save the Power, Pulse
Duration, and Inter-Pulse Time parameters as pre-sets for the three instruments used
with the system. To select an instrument, rotate the Menu Knob until the desired
instrument is highlighted, then push the knob. The selected instrument's Pre-Set
screen appears as shown in Figure 2-15 where LIO was selected.
To pre-set an instrument parameter value, rotate the Power, Pulse Duration, and
Inter-Pulse Time Knobs to the desired values for the selected instrument. After the
settings have been changed, the user can select "Save" to save the changes and go to
the operating display or "Cancel" to revert back to the last saved pre-set.
Figure 2-14
Contrast Settings
Figure 2-15 Fiber Custom Pre-Sets Screen