User's Manual Part 2

2.12
8065751131
MAIN MENU
The Main Menu is displayed by selecting "Main Menu"
from either the Initialization screen or the Standby screen.
The selection is made by rotating the Menu Knob until
"Main Menu" is highlighted, then pressing the knob to
activate the selection. The Main Menu, shown in Figure
2-11, allows the user to access screens that change system
settings and view system information. Each selection is
defi ned as follows:
Settings - System settings that can be adjusted by the
user.
System Information - Read-only system values provided
for the user's information.
Reset to Factory Defaults - Allows the user to quickly reset the system to its
default settings.
•
•
•
Shots/Energy
This fi eld displays the number of shots fi red since the unit was powered up or since
the user re-set the shot count. Through the Treatment Totals Options menu, the user
can set the system to display the energy (in Joules (J)) since the unit was powered up
or since the user re-set the value.
READY SCREEN
The Ready screen shown in Figure 2-9 indicates that the
system is ready to fi re. It is displayed when the user presses
the Standby/Ready mode button while the system is in
Standby. The screen is essentially the same as the Standby
screen except that the background is green and the Main
Menu button is inactive. Actions permited in this screen
include: adjusting the displayed parameters, resetting the shot
count, and connecting fi bers to the ports.
Figure 2-9
Ready Screen
LASER ON SCREEN
The Laser On screen shown in Figure 2-10 indicates that
footpedal has been depressed and the system is fi ring
the laser. In this screen the displayed parameters can be
adjusted. Releasing the footpedal sends the system back to
the Ready screen.
Figure 2-10
Laser On Screen
Figure 2-11
Main Menu