User's Manual Part 1

1.2
8065751131
Table 1-1
Technical
Specifi cations
CATEGORY
SPECIFICATION
Approximate Dimensions
Width: 0.23 m (9.00 inches)
Depth: 0.34 m (13.50 inches)
Height: 0.18 m (7.00 inches)
Approximate Weight
10.4 kg (23 lbs)
Electrical Characteristics
Voltage: 100-120 VAC@ 5 A (max current)
220-240 VAC @ 2.5 A (max current)
Frequency: 50/60 Hz
Fuse rating: 250V,Single Phase T5 Amps
Insulation class: Class I, type BF,
Fuse rating: 250V,Single Phase T5 Amps
Environmental Limitations
Operating: Temperature: 10°C ≤ T°≤ 35°C
Relative Humity: 10% to 90% with no condensation
Storage: Temperature: -40°C ≤ T°≤ 70°C
Relative Humity: 10% to 95% with no condensation
Miscellaneous
PurePoint
Laser complies with CE MDD requirements.
PurePoint Laser complies with CE MDD requirements. PurePoint
Not suitable for use in the presence of fl ammable anesthetic, oxygen or
nitrous oxide.
System not protected against the ingress of water.
Leakage current per IEC 60601-1 is below 500 micro amps at 264 VAC.
Leakage current per IEC 60601-1 is below 300 micro amps at 132 VAC.
Ground continuity per IEC 60601-1 is below 0.1 ohm.
Table 1-2
Laser
Characteristics
CATEGORY
TREATMENT LASER BEAM
AIMING LASER BEAM
Laser Class
IV
II
Laser Power
• 30 mW to 200 mW in 10 mW
steps
• 200 mW to 500 mW in 20 mW
steps with additional steps at:
250, 350, 450
• 500 mW to 950 mW in 50 mW
steps
• 1000 mW to 2000 mW in 100
mW steps
Less than 1 mW; adjustable by
operator
Laser Wavelength
532 nm
635 nm +/- 5 nm