User's Manual Part 4

8065751025 2.97

Constellation

Vision System

Setup Form: Editing the Form - Creating New Tables

To begin the customization process, the user must first select a table on the form by

pressing on it. The table is then shown with selection handles and the active cell is

shown in red.

To insert a new table after the selected table, follow these steps:

In the Table section of the Edit Form panel, press the Insert button (Ins). A table

with two rows and three columns appears below the selected table and the new

table is now the selected table. To delete the table, press the Delete button (Del).

The Table Type is selected from the Type dropdown list in the Table section of the

Edit Form panel. The default table type for new tables is Custom which contains

no entries or formatting (see Customizing Table Cells for information on editing

individual cells).

Select the type of table desired from the Type dropdown list. There are five

preformatted tables available from the list which automatically pull data from the

procedures performed. The Custom selection allows the user to create a custom

table to meet their particular requirements. Preformatted tables may also be

customized according to the users requirements.

To increase the height of the selected row, press the Height% dropdown button

and select an entry between 1 and 20%. The default row height is 2, so selecting 1

will result in a smaller row height and all selections above 2 will result in a larger

row height. The height of the selected row is displayed on the Height% button.

To insert or delete a row, press the Ins (insert) or Del (delete) button in the Row

section of the Edit Form panel.

To increase the width of the selected column, press the Width% dropdown button

and select an entry between 5 and 90%. The default column width is 30, so

selecting 5 through 25 will result in a smaller column width and all selections

above 30 will result in a larger column width. The width of the selected column is

displayed on the Width% button.

To insert or delete a column, press the Ins (insert) or Del (delete) button in the

Column section of the Edit Form panel.