User's Manual Part 4

8065751025 2.95
Constellation
®
Vision System
In computing a step’s cumulative time, it is necessary for work to be done while
the step is selected in order for the current elapsed time to be added to the step’s
cumulative time. Therefore, a user may access a step and interact with the various
touchscreen controls for an extended period of time but, unless the treadle is
depressed, the current elapsed time will be discarded and will not be added to the
step’s cumulative time. If the step’s cumulative time is zero, the step will not be
shown in the step summary list.
Metrics Tabs
The End Case Metrics screens are accessed through the labeled tabs next to the
Summary panel. Tabs are provided for Anterior, Posterior, Laser, and Consumables.
When selected, each tabs displays the associated metrics for that tab as shown by the
Anterior tab in Figure 2-71. The Consumables tab displays all consumable items that
have been detected by the system.
Setup Form
The End Case Form Setup screen shown in Figure 2-72 is displayed by pressing the
Setup Form button on the End Case Screen. The screen shows a picture of the End
Case Form print-out and provides controls for navigating to other pages in the print-
out and for customizing the layout/content of the print-out.
The buttons at the bottom of the Form Setup screen perform the following actions:
Page arrow buttons - Pressing these buttons allows the user to move through each
page of the printout.
Close button - Pressing the Close button causes the system to save the various
layout and content customization settings and return to the End Case screen.
Cancel button - Returns the system back to the End Case screen without saving
changes made to content and layout.
•
•
•
Pressing the Edit Form button allows
the user to customize the layout and
content of the printout.
Figure 2-72 End Case: Setup Form Screen
Edit
Button