User's Manual Part 4

8065751025 2.77
Constellation
®
Vision System
(pulses per second-pps) and Time On (%) U/S power pulses. The pulse is controlled
with the footpedal from detent two to full treadle depression. The actual percent of
time U/S power is activated is reflected in the Actual window.
The controls for each panel in Pulsed submode have the following functions:
Aspiration Panel:
Same as Burst submode.
Vacuum Panel:
Same as Burst submode.
Ultrasound Panel:
Power End Up/Down Buttons - Sets the power at full treadle.
Power Progress Bar and Numerical Value - Shows the current power value.
Phaco Power Configuration Button - Displays the configuration dialog.
Phaco Pulse Rate Up/Down Buttons - Set the Phaco pulse rate in pulses per
second (pps).
The following controls are available only in the Advanced view:
Smart Pulse - Indicator for smart pulse. Becomes visible when power is greater
than 0 and pulse on time is less than 20ms.
Power Limit Control Type Drop List Determines whether the power limit is
fixed or linear. In Fixed, the limit is constant regardless of the vacuum level.
In Linear, the limit varies depending on the vacuum level.
Phaco Pulse Time On Up/Down Buttons - Sets the Phaco time on percentage.
Phaco Pulse Configuration Button - Displays the configuration popup.
Phaco Mode: CONTINUOUS SUBMODE
In the Phaco Continuous submode provides continuous fixed U/S power
(Power %). Phaco power is controlled with the footpedal from detent two to full
treadle depression. The actual percent of time U/S power is activated is reflected in
the Actual window.
The controls for each panel in Continuous submode have the following functions:
Aspiration Panel:
Same as Burst submode.
Vacuum Panel:
Same as Burst submode.
•
•
•
•
•
•
•