User's Manual Part 4

8065751025 2.89
Constellation
®
Vision System
Exposure Time Up/Down Buttons - Adjust the laser exposure time. Only available
in Repeat or Single Shot modes.
Interpulse Time Up/Down Buttons - Adjusts the laser interpulse time. Only
available in Repeat mode.
Aiming Beam Up/Down Buttons - Displays the current relative intensity of the
aiming beam.
LIO Illumination Intensity Up/Down Buttons - Adjusts the LIO illumination
intensity.
Shot Count Label - Displays the current shot count. Also allows for the shot
count to be reset.
Total Energy Label - Displays the total energy. Also allows for the total energy to
be reset.
Laser Configuration Button - Displays the configuration dialog. Simplifies large
value changes by providing slider controls.
NOTE: In tethered mode, all front panel controls except for the emergency
switch are disabled.
Forceps Mode
The Forceps Pressure Panel controls the pressure for opening and closing pneumatic
forceps. Figure 2-66 shows the Forceps surgery screen. The controls for each panel in
Forceps mode have the following functions:
Forceps Panel:
Pressure Start Up/Down Buttons - Sets the pressure at treadle start.
Pressure End Up/Down Buttons - Sets the pressure at full treadle.
Pressure Progress Bar and Numerical Value - Displays the current pressure value.
Forceps Configuration Button - Displays the configuration popup.
•
•
•
•
•
•
•
•
•
•
•
Figure 2-66 Surgery Screen: Forceps Mode