User's Manual Part 3

8065751025 2.53
Constellation
®
Vision System
Detailed Setup: Illuminators
The Illuminators setup panel shown in Figure 2-41 displays the steps required to
properly setup and connect illuminator probes to the front panel.
Select Illuminator - Provides a selection of illuminator probes and shows where
to connect the probe. When the system detects that the operator has connected the
illuminator probe, that probe is automatically selected and the “connected” icon
appears next to the selection list.
Select Illuminator Type - Shows the Illuminator probe type the operator has
chosen and/or inserted for the highlighted illuminator port.
The following illuminator probes are selectable:
• Straight
• Wide Angled
Select Gauge Size - This control is only available when the an illuminator type
has been selected. When the guage size is selected, it is displayed under the
selected probe. The following illuminator gauge sizes are selectable:
• 20 Gauge
• 23 Gauge
• 25 Gauge
Connect Illuminator - This section shows an illustration of the connector panel
and highlights the connections for the selected probe.
1.
2.
3.
4.
Figure 2-41 The Detailed Illuminator Setup Panel