User's Manual Part 3

2.52 8065751025
Constellation
®
Vision System
Detailed Setup: Accessories
The Accessories setup panel shown in Figure 2-40 displays the steps required to
properly connect the following accessories:
Scissors
Viscous Fluid Controller
Forceps
Auto Gas Fill
Diathermy
Select Optional Accessory - Provides a selection of accessories and, when an
accessory is selected, shows where to connect the accessory. When the system
detects that the operator has connected the accessory, that accessory type is
automatically selected and the “connected” icon appears next to the selection list.
Confirm Connection - This button is present when the user has selected an
accessory that is not currently detected as connected by the system. When this
button is pressed, the system assumes that the currently selected accessory has
been connected (even though it was unable to detect it). However, since the
system did not auto-detect the connection, it will not lock the user from selecting
the type of the accessory (e.g., type of scissors).
Connect Accessory - This section shows an illustration of the connector panel and
highlights the connections for the selected accessory.
•
•
•
•
•
1.
2.
Figure 2-40 The Detailed Accessory Setup Panel