User's Manual Part 3

8065751025 2.63
Constellation
®
Vision System
Figure 2-51 Surgical Step Panel - Custom Procedure
Selected Step
Scroll Button(s)
Figure 2-50 Accurus
®
Classic Surgery Screen
Surgery Screen: Surgical Procedures - Custom Procedure
Custom Procedures can contain any combination of steps in any order and with user
defined names as shown in Figure 2-51.
Custom Procedures are intended to contain all the steps that the user has included to
perform a certain task. However, in some cases the user may need to do something
that is not included in the current procedure. In addition to the manual method of
adding surgical steps through the Modify Procedure screen as described previously in
this section, the system automatically adds relevant step(s) when an instrument (such
as a Vitreous probe) is connected. For example if the user suddenly requires the use of
the laser, the system automatically adds a laser Step to the end of the procedure when
it detects the connection of a laser probe. Also, if a laser probe is already connected
when the procedure is selected, a laser step is added to the end of the procedure.