User's Manual Part 3

8065751025 2.59
Constellation
®
Vision System
Surgery Screen: Surgical Controls
The surgical panels make use of the surgical controls to change the values of the
associated surgical functions. The controls provide a variety of information and
capability to the user. As an example, the Vacuum control is shown in Figure 2-47.
On/Off
Button
Detailed
Settings
Button
Actual
Value
Start
Value
End
Value
Slider Controls
Increase
Setpoint
Value Button(s)
Progress Bar
Decrease
Setpoint
Value Button(s)
Figure 2-47 Vacuum Control and Settings Popup
The surgical controls contain some or all of the functionality described here:
On/Off Button– Toggles the function on and off. A green button indicates that the
function is on while a dark gray button indicates that the function is off.
Up/Down Arrow Buttons – Increase/decreases the associated setpoint value. The
button face indicates whether or not the associated setpoint can be increased or
decreased. The button is disabled when increases/decreases are not allowed.
Start Value – Shows the current setpoint at the treadle starting position.
End Value - Shows the setpoint at full treadle. Note that the Start and End objects
always control the same function and that their states (pressed or raised) always
track.
•
•
•
•
Settings Popup