User's Manual Part 2

2.16 8065751025
Constellation
®
Vision System
In general, customization of a procedure is performed by selecting a step from the
list of available source steps in the Procedure Manager and inserting the step into a
list of destination steps in the upper panel named "In Procedure". Only the current
procedure can be modified. The available steps in the Procedure Manager can be
filtered as desired using the selections in the "Filter by:" drop down menus.
Creating Or Editing Procedures
As shown in Figure 2-9a, the name of the current procedure and surgeon are shown at
the top of the screen. This is followed by the steps comprising the current procedure.
Below the current procedure steps is the Procedure Manager which contains a
complete library of steps that can be added to the current procedure.
Figure 2-9a Procedure Modify Screen
The items on the Modify screen are defined and operate as follows:
In Procedure: xxx - Shows the name of the procedure containing the selected
available Step.
Left button - Moves the selected step one position to the left.
Rename button - Opens the keyboard popup to enable renaming of the currently
selected step.
Right button - Moves the selected step one position to the right.
Add to Favorites button - Adds the selected step to the Favorite Steps panel.
Add button - Adds the selected step to the list of steps in the current "In Procedure"
steps list.
Delete button - Deletes the selected step from the list.
Procedure Manger Panel - This panel contains the list of steps available for insertion
into the In Procedure list. Pressing the arrows on the scroll bar scrolls through the
complete list. Also included in this panal are the following filters:
Doctor Step Filter - Restricts the available steps to those belonging to the
specified doctor’s procedures.
•