User's Manual Part 2

8065751025 2.15
Constellation
®
Vision System
Selecting the Footswitch icon displays the Footswitch popup shown in Figure 2-9.
This popup shows the footswitch with labels indicating the current mapping for each
button. Pressing the Configure button closes the dialog box and displays the Doctor
Settings screen with the Footswitch tab selected. In this screen the footswitch can be
configured as desired. Refer to Doctor Settings\Footswitch later in this section for
detail information on configuring the footswitch.
Menu Bar: Doctor Selection
Pressing the Doctor Selection button displays a popup with the names of all available
doctors. Selecting one of the entries will change the currently selected doctor and also
update the current procedure and – if in surgery – the current step.
New doctors can be added to the list by pressing the “Add Doctor” button. When this
entry is selected, a keyboard is displayed allowing the user to enter a new doctor. The
new doctor is automatically selected if the name is valid (the name cannot be more
that 40 characters or a duplicate name). If the name is identical to a doctor already in
the system, an advisory is displayed.
Menu Bar: Procedure Selection
The Procedure Selection popup (see Figure 2-9) contains the names, sorted
alphabetically, of all available procedures for the current doctor with the currently
selected procedure highlighted. To select another procedure, simply press the desired
procedure. The procedure will become highlighted and the popup will close. The
Close button can be used to exit the dialog without changing the procedure.
Pressing the "Add New Procedure" button starts the process of adding a new
procedure to the list of available procedures for the currently selected doctor. Refer to
the following section entitled "Adding a New Procedure" for detailed instructions on
adding a new procedure and an description of the screens used to setup the procedure.
ADDING A NEW PROCEDURE...
To add a new procedure to the list of procedures available to the current doctor,
follow the steps below:
1. Press the "Add New Procedure" button in the Procedure Selection Popup.
A keyboard is displayed allowing the user to name the new procedure.
2. Using the keyboard, enter the name of the new procedure then press "Save".
The keyboard popup closes and the Modify procedure screen is displayed as
shown in Figure 2-9a.
The Modify procedure screen is used to create custom surgical procedures. The
dialog presents a scrollable list of available surgical steps the user can add to the
procedure being created or modified. Note: Procedures can also be modified in
Surgical mode by pressing the Modify button. In addition to adding steps, the user
can also remove, rename, and move steps within the current procedure. The steps can
be manipulated using the buttons in the Modify or by Drag-and-Drop functionality,
i.e., press and drag the step icon to the new location.