Operating instructions

– 5 –
Getting Started
Install and Charge the Batteries
Insert two pieces AAA batteries in the compartment, ensuring
correct polarity and close the compartment.
• Please wait for 30 seconds after removing the old batteries
when change and install a new pair battery.
• Place the handset in the base station to charge for 14 hours
prior for first use. If you don’t properly charge the phone,
battery performance will be compromised.、
• Use only battery models listed in the Technical
Specifications.
Warning: The handset does not work and damaged if the
wrong batteries are inserted.
Caution: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instruction
If batteries are empty, handset LCD will not has any display and
the handset will not response to any key. Handset is then
required to put back on Base Station / Charger cradle to charge.
Handset cannot be used until handset name and aerial icon
appear. If handset does not charged full before use, handset
may emit battery low alert tone and battery level indicator
shows empty.