Operating instructions

– 9 –
LED state
1. LED on base station
a. LED – In-use, Color – Green
Pattern Function
Steady On When handset is off-hook
Flashes When there is incoming ring signal
b. LED – Charging, Color – Red
Pattern Function
Steady On When handset is in the cradle and charging
Flashes When paging, in cadence with ringing signal
2. LED on HS
Pattern Function
Flashes
When message waiting received, or
incoming ring signal.
Basic Operation
Make a Call
1. Press the or key, wait for a dial tone, then dial
the desired number.
2. After finishing the conversation, press
key or place
the cordless handset into the charger.
The talk timer will be shown during talk.
Note: In idle mode press and holding
or for 1.5 seconds,
the number associated with the
or key will dial out.