Digital Cordless Telephone SN200 User’’s Guide
Introduction CAUTION: Rechargeable batteries are included with this DECT phone. Never use non-rechargeable batteries! Use of improper batteries will void the warranty and risk the danger of explosion. Important Safety Notes Please observe the following to ensure reliable operation of the telephone: • Read this manual thoroughly and observe the operating instructions and information provided.
• Only replace the batteries with types recommended by us. Dispose off defective batteries according to the applicable local laws (not in household waste). We assume no liability for damage caused by using the equipment for unintended purposes. • European Communities (EC) RF Radiation Exposure Statement: The installation of the base unit should allow at least 20 centimeter between the base and persons in compliance with EC RF exposure Council Recommendation (1999/519/EC).
battery listed in User’s Guide. • Keep batteries out of children. • Remove batteries if storing over 30 days.
Only use the connection cable supplied. Phone jack AC power outlet CAUTION: Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. Use only power adaptor models listed in the Technical Specifications. Using other power supplies may damage the unit.
Getting Started Install and Charge the Batteries Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. • Please wait for 30 seconds after removing the old batteries when change and install a new pair battery. • Place the handset in the base station to charge for 14 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised.、 • Use only battery Specifications.
Features 1. Comfortable digital cordless phone with DECT Standards 2. Phonebook for 25 / 50 entries with names and numbers 3. Caller ID* function with up to 20 name/number call log 4. Operation guidance in multi-languages 5. 10 polyphonic ring tone melodies at handset 6. 5 monotonic ring tone at base station 7. Microphone mute 8. Operates with up to 6 handsets 9. Ringer on/off 10. 10 Last number redial 11. 5 ring level + off 12. Real time clock display 13. Handset name 14. Automatic call answering 15.
Handset and Base Layouts LED Headset jack + - Redial / Up /Increase volume key Caller ID/Down/ Decrease volume key Menu / OK key Cancel/ Flash key Talk On/Off key Handsfree key Asterisk /INT key Hash /Keypad lock key Zero/Pause Key –7–
Memory Key 1 Memory Key 2 LED –Charging LED –IN USE Paging key LCD Display Icon Description Antenna icon Phone icon Key lock icon Ring off icon Speakerphone icon Battery level indicator New call icon Alarm icon –8–
LED state 1. LED on base station a. LED – In-use, Color – Green Pattern Function Steady On When handset is off-hook Flashes When there is incoming ring signal b. LED – Charging, Color – Red Pattern Function Steady On When handset is in the cradle and charging Flashes When paging, in cadence with ringing signal 2. LED on HS Pattern Flashes Function When message waiting received, or incoming ring signal. Basic Operation Make a Call 1.
Pre-dialling 1. 2. When the handset is in idle mode, input the desired number. key to cancel the wrong digit, input the Press correct one again. If a pause is needed during dialing, key for a while and character “P” will press and hold be shown. A 3 seconds pause will be added while dialing. or key, the number will be 3. Press the automatically dialled out. key or place 4. After finishing the conversation, press the cordless handset into the charger. The talk timer will be shown during talk.
Dialing from the Phone Book Press button when in standby mode and the LCD on the button handset will display “PHONEBOOK”, then press and the first entry in the phone book appears. Note: If there is no record in phone book, “EMPTY” information will display 1. 2. 3. Press + or - key to select the required record from the phone book. or key to dial out the number. Press key or place After finishing the conversation, press the cordless handset into the charger to terminate the call.
end the call. The call will be automatically transferred to the target handset. Note: If the target handset doesn’t answer within 30 seconds, the call transfer procedure will be cancelled and the external call will return to the original handset. Press the or key to answer the call. Three-way Conversation You may have a 3-way conversation using the intercom and an open line. 1. 2. 3. 4. key and input the During external call, press and hold desired handset number.
Switching the Key Lock On/Off Press and hold key to activate or deactivate the key lock. icon turns on or off. The Note: Incoming calls can still be received when key locked. Redial Function The last 10 numbers you dialed out will be separately stored in handset redial memory. Review Redial Record 1. 2. When the handset is in idle mode, press . Press + or – key to select “REDIAL” menu, then press key Press + or - key to review all redial records. 3. Or 1.
2. 3. 4. Press key to enter menu, press + or - key to select “DELETE RECORD”, key, “CONFIRM?” will be shown. Press key to confirm. Press Delete All Redial Records 1. 2. Select a redial record. key to enter menu, press + or - key to select Press “DELETE ALL”. key, “CONFIRM?” will be shown. 3. Press key to confirm. 4. Press Note: During redial function operating, if you want to return to key.
disappeared. Note: 1. If you reviewed all the missed calls from one handset, the display “ ” will still on other handsets. key to toggle the display of the caller identity, 2. Press number and Date/Time. Review Call Log Record 1. 2. When the handset is in idle mode, press Press + or – key to select “CALL LOG” menu, then press key Press + or - key to review all call log records. 3. Or 1. Press - key to display the information for the last call received. 2. Press + or - key to review all call log records.
Delete a Single Call Log Record 1. 2. 3. Select a call log record key to enter menu, press + or - key to select Press key, “CONFIRM?” will “DELETE RECORD”, press be shown. key to confirm. Press Delete All Call Log Record 1. 2. 3. Select a call log record. key to enter menu, press + or - key to select Press key, “CONFIRM?” will be “DELETE ALL”, press shown. key to confirm. Press Dial back from a Call Log Record 1. 2. 3.
3. Press key, the LCD on the handset will display key, “ADD NEW ENTRY”, then press 4. Enter name (maximum 16 characters) and press key when finished. key, enter number and press Note: 1. When the capacity is full, “MEMORY FULL” will display. key. 2. Any incorrect input can be deleted by pressing Key assignment overview Key 1 2 3 4 5 6 7 8 9 0 * # Capital letter 1 ABC2 DEF3 GHI4 JKL5 MNO6 PQRS7 TUV8 WXYZ9 0 -,.?&=* :“$£€¥# Edit Entries Press key to access phone book memory.
Edit or At the pre-dial screen or any of the main menu phonebook, call log or redial review screens, pressing and holding the keys for 1.5 seconds will store the shown number. or Delete Entries Press key to access phone book memory. key and press + or - key to scroll, Press 1. Press key to select a desired entry, and then press + or - to select the submenu “DELETE RECORD”. key, “CONFIRM?” will be shown 2. Press key again to confirm. 3. Press Delete All Entries Press key to access phone book memory.
HH:MM in 24-hour format or in 12-hour format. key to confirm. 6. Press Note: When Alarm time is reached, “ALARM 1” or “ALARM 2” and time will display and alarm sound will stop after around 1 minute. The Alarm establishes prompt ring everyday. Handset Setting Ring Melody You may select one of the 10 available ringer tones for your incoming calls alert tone. The default setting is “01” for external call and “02” for internal call. key. 1. Press 2. Press + or - key to select “HS SETTINGS” and press key. 3.
Date / Time format You can set the Date/Time format displayed. key. 1. Press 2. Press + or - key to select “HS SETTINGS”. key, and press + or - key to select 3. Press “DATE/TIME SETTINGS”. key, and press + or – key to select 4. Press “DATE/TIME FORMAT”. key, and press + or – key to select “DATE” or 5. Press “TIME”. key, and press + or - key to select the 6. Press desired Date/Time format key to confirm. 7.
Set Time 1. 2. Press key. Press + or - key to select “HS SETTINGS” and press key, press + or - key to select “DATE/TIME SETTINGS” key, then press + or – key to select press key, press + or – key to select “DATE/TIME” press key. “TIME” press 3. Input the correct time using number key, the 12HR format is: hour/minute (hour range: 01-12, minute range: 00-59), the 24HR format is: hour/minute (hour range: 00-23, minute range: 00-59). key to confirm the setting. 4.
AUTO During a call, (press and hold) + key to access up to the highest boost level with receiver. However, the handset will restore to normal volume after phone off from boost level. Key Tone You may set the key tone to “ON” or “OFF” when you press the keypad. The default setting is “ON”. key. 1. Press 2. Press + or - key to select “HS SETTINGS” and press key. 3. Press + or - key to select “KEY TONE” and press key. 4. Press + or - key to select “ON” or “OFF”. key to confirm the setting. 5.
3. 4. 5. Press + or - key to select “LOW BATT TONE” and press key. Press + or - key to select “ON” or “OFF”. key to confirm the setting. Press Display Contrast Your cordless handset has different display contrast. key. 1. Press 2. Press + or - key to select “HS SETTINGS” and press key. 3. Press + or - key to select “DISPLAY CONTRAST” and key. press 4. Press + or - key to select contrast. key to confirm the setting. 5. Press Handset Name You can set the cordless handset name that you like. key. 1.
Auto Talk This option allows user to pick up the cordless handset from charger to answer the call directly when a call is coming, and no or key. need press key. 1. Press 2. Press + or - key to select “HS SETTINGS” and press key. 3. Press + or - key to select “AUTO TALK” and press key. 4. Press + or - key to select “ON” or “OFF”. key to confirm the setting. 5. Press Language You can set different language. key. 1. Press 2. Press + or - key to select “HS SETTINGS” and press key. 3.
Base Setting Base Ringer Melody You may select one of the 5 available ringer music for your incoming calls alert tone. key. 1. Press 2. Press + or - key to select “BS SETTINGS” and press key. 3. “INPUT PIN” will be shown, Input the correct PIN code and key. press 4. Press + or - key to select “BASE MELODY” and press key. 5. Press + or - key to select the desired ring music, the selected music will be sounded. key to confirm the setting. 6.
You may change the PIN. Please take down the change so as to operate the unit normally. key. 1. Press 2. Press + or - key to select “BS SETTINGS” and press key. 3. “INPUT PIN” will be shown, input the correct PIN code and key. press 4. Press + or - key to select “CHANGE PIN” and press key, the LCD will show “NEW PIN”. 5. Press number key to input the new PIN code and press key, the LCD will show “CONFIRM”, prompt you to input the new PIN code again. key to 6.
2. 3. 4. 5. 6. Press + or - key to select “BS SETTINGS” and press key. “INPUT PIN” will be shown, Input the correct PIN code and key. press Press + or - key to select “FLASH TIME” and press key. Press + or - key to select the desired flash time. key to confirm the setting. Press VMWI If you have subscribed to a voice messaging service, the LCD will display “MESSAGE WAITING” and flash to alert you that you have received new message. To turn Visual Message Waiting Indication (VMWI) off key. 1. Press 2.
5. key, the LCD will display “CONFIRM?”. key to confirm the setting. Press Registration Register Handset 1. 2. 3. 4. 5. Press key. Press + or - key to select “REGISTR.” and press key. Press + or - key to select “REGISTER” and press key, The LCD will display “INPUT PIN”. key to begin Input the correct PIN code and press to register the cordless handset, the LCD will blink “REGISTR.”. Base station Press and hold the key for about 15 seconds until long beep sound and in-use LED flashes. Note: 1.
3. 4. Press + or - key to select “SELECT BASE” and press key, Press + or - key to select a specific base. key to confirm the setting. Press Remove Handset This option allows user to remove the registered cordless handset from the base. key. 1. Press 2. Press + or - key to select “REGISTR.” and press key. 3. Press + or - key to select “REMOVE HANDSET” and key. press key. 4. Input the PIN code and press 5. Press + or - key to select the cordless handset you want to key.
Technical Specifications Handset Operating Time: (average values*) AC / DC Adapter (For Base) Approx. 10/12 hours talk time Approx. 100/120 hours standby Model No.: KB1B-060-0250D Manufacturer: Kings INPUT: 230V AC 50Hz 30mA OUTPUT: 6V DC 250mA Single-phase AC excluding IT installations defined by the EN60950 standard. Caution: the network voltage is classified as a hazard by the criteria of this standard.
Troubleshooting Guide PROBLEMS Registrations not work. No display. CAUSES The battery is not sufficiently charged. Handset and base station were not prepared for registration. The battery has not been charged. No reactions to keystroke. The keypad is locked. No radio connection to the base station: icon omits and LCD display “SEARCHING” The handset is outside the base station range. The handset is not registered. The base station does not work.
General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Periodically clean the charge contacts on the handset, base and charger with a soft cloth. Due to continuous product development all features and specifications are subject to change without prior notice.
