User`s guide

13
4.4.4.4 “Display set”
z “Back light”: Set the duration of back light.
z “Contrast”: Press [[▲]] or [[▼]] to modify contrast of
sreen.
4.4.4.5 “Security set”: Open or close the function of PIN
checking. If user want to modify PIN must opend the
PIN check first.
4.4.4.6 “AutoCall”: If user don’t press “SEND” key after
entering the digit the telephone will automatically
send a call. The duration can be set from 2 seconds
to 10 seconds.
Note: The function must be used under Off-Hook or in
“Handfree” mode.
4.4.4.7 “Reset”: Select to reset the parameter of the phone of
factory settings.
4.4.5 Call Service
Note: The following service needs the support of the network
server.
4.4.5.1 ”Select network”: User could choose “Auto” mode or
“Manual” mode.
4.4.5.2 “Call diverts”: Support different “Call diverts”
service including: “Divert All Call”, “When busy”,
“No answer”, “Not reachable”, “Cancel all”.
4.4.5.3 “Call waiting”: Open, close and query the “Call
waiting” service.
4.4.5.4 “Call bar”: Support different “Call bar” service
including “Bar All MO Call”, “Bar All MT Call”, “Bar
MT Call ROAM”, “Bar MO Call INTL” and “Bar MO
Call EXHC”.
4.4.5.5 “Outgoing unshown”: query the “Outgoing
unshown” service.
4.4.5.6 “Speed Dial”: User could add and delete the “Speed
Dial” item.
4.4.5.7 “Band Select”: Select the band according to the
network service.
4.5 Input Method
The device support T9 input method with associated input
function, user can input the number, the symbol, english letter (including
capital letter and small letter).
4.5.1 Switch input method