Specifications

have the possibility to answer the transmission.
To disable the dual channel scan
Repeat the setup 1 and 2,and then roll-over at ‘ ’ which means the dual scan is
disabled.
Automatic Power Off (APO)
To save energy, you can activate the Automatic Power Off function. In case you
forgot to power off the unit, it will switch off automatically after the set time.
1. Press until appears.
2. Press or button to adjust the automatic power off time or disable the
function with the section ‘ ’.
3. Press PTT to confirm the setting or to continue set up.
Keypad tone
Once enable this function, the unit will beep briefly, when a button is pressed.
1. Press button until appears, the current setting flashes.
2. Press or button to enable ‘ ’ or disable ‘ ’ the key tone.
3. Press PTT to confirm the setting or to continue set up.
Chronometer
The unit has a chronometer function (mm:ss).
18