Specifications

this way.
To restore the channel, turn the radio off and then back on.
Note: You cannot remove the channel which your radio was set to (called your
home channel) when you start scanning.
Dual Channel Scan
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will
only receive signals transmitted on that channel and CTCSS code. Dual Channel
Monitor allows you to monitor a second channel with CTCSS code.
To set dual channel and code
1. Press until display.
2. Press or button will increase or decrease the dual channel.
3. Press again and then press or button will increase or decrease the dual
code number.
4. Press PTT to save the dual channel and code combination or to continue set
up.
To start dual scan, briefly press key. The scan indicator is shown.
When the Dual Channel Monitor function is activated, will shown on the
display. The PMR will switch sequentially between the standby channel + CTCSS
and the Dual Channel + CTCSS. When there is activity on the Dual Channel +
CTCSS, the active channel will be displayed for 5 seconds. Within this period, you
17