Air Cleaner User Manual

9
message. Or do message setting and broadcast setting etc.
4.3 Quick Operation Guide
Before using the telephone, user should make sure that the power is
on and the correct SIM card is inserted. User could use the telephone till
the name of network supplier appeared in the display.
If the power has been on, but user did not insert SIM card, telephone
prompts to insert SIM card and check it whether it could be used or not.
Warning: Please power off you phone before changing the SIM card.
To plug in or out the SIM card when connected to outer power source or
battery is forbidden. Please don’t touch the metal surface of the SIM card
that information in the card may be lost or destroyed. Put the card away
from electricity and magnetism as you can. If SIM card is damaged, the
device can’t connect the network.
4.3.1 Making a call
- Off-Hook or pressing will hear the dial tone, then user
can dial number.
- In standby mode, enter telephone number, Off-Hook or
press
or [[SEND]] to send a call.
- The display shows the digit that user entered. User can
press [[CANCEL]] or “Delete” to delete the latest digit when
find the incorrect number.
- After inputting the number, press [[Send]] or wait a few
seconds (user could modify the time by setting “AutoCall”
in setting menu) to send a call.
- Answer a call, the calling time will be showed on the
screen.
- In talking mode, press [[▲]] or [[▼]] could adjust the
handset volume.
4.3.2 Dial number in telephone book
In telephone book, press [[▲]] or [[▼]] to find the number user
want to dial. Pressing [[SEND]] to call it after finding the number.
4.3.3 Answering call
When in ringing mode, take up the handset or press to
answer the call.
4.3.4 Ending call
There are different ways to end call in two status.
Press
to end call in Hand free mode.
Press [[HANGUP]] to finish a call.