Air Cleaner User Manual

13
z “Volume”: User can change the items as follows: call
ring, Msg ring and speaker volume.
4.4.4.2 “Alarm”: Set the alarm type and alarm time. There
are two alarm to choose.
4.4.4.3 “Time and date”: Set time and date.
4.4.4.4 “Display set”
z “Back light”: Set the duration of back light.
z “Contrast”: Press [[▲]] or [[▼]] to modify contrast of
sreen.
4.4.4.5 “Security set”: Open or close the function of PIN
checking. If user want to modify PIN must opend the
PIN check first.
4.4.4.6 “AutoCall”: If user don’t press “SEND” key after
entering the digit the telephone will automatically
send a call. The duration can be set from 2 seconds
to 10 seconds.
Note: The function must be used under Off-Hook or in
“Handfree” mode.
4.4.4.7 “Reset”: Select to reset the parameter of the phone of
factory settings.
4.4.5 Call Service
Note: The following service needs the support of the network
server.
4.4.5.1 ”Select network”: User could choose “Auto” mode or
“Manual” mode.
4.4.5.2 “Call diverts”: Support different “Call diverts”
service including: “Divert All Call”, “When busy”,
“No answer”, “Not reachable”, “Cancel all”.
4.4.5.3 “Call waiting”: Open, close and query the “Call
waiting” service.
4.4.5.4 “Call bar”: Support different “Call bar” service
including “Bar All MO Call”, “Bar All MT Call”, “Bar
MT Call ROAM”, “Bar MO Call INTL” and “Bar MO
Call EXHC”.
4.4.5.5 “Outgoing unshown”: query the “Outgoing
unshown” service.
4.4.5.6 “Speed Dial”: User could add and delete the “Speed
Dial” item.
4.4.5.7 “Band Select”: Select the band according to the
network service.