User Manual

pg-6
Breath Alcohol
Concentration (BAC)
Digital Display and Audio Signals
0.000-0.049% %BAC displayed on screen with audible beep
0.050 - 0.200% %BAC displayed on screen with one long audible beep
0.200 upwards ‘OL’ will appear on the screen indicating the maximum level
has been reached
RETESTING
To retest, if your AlcoLimit VIVID has turned itself o , depress the ON/OFF button, and wait for it to
warm up again.
When high alcohol readings are received, retesting should be spaced 3 minutes apart to
allow all alcohol vapour to be eliminated from the sensor.
FAST MODE
This mode simply detects the presence or absence of alcohol.
Turn the unit on, blow gently through the mouthpiece and depress the ON/OFF button while blow-
ing.
The result will be displayed as either ‘P’ when alcohol is not detected or ‘F’ when alcohol is detected.
USAGE COUNTER
Press and hold the ON/OFF button at start-up and ‘C’ and ‘A’ will appear on the display followed by
numbers. ‘C’ = number of tests since the last calibration. A = number of tests that have detected
alcohol since the last calibration.
DISPLAY & INTERPRETATION
Your %BAC will be displayed on the screen for 20 seconds after which your ALCOLIMIT VIVID will
turn itself o .
This device is a 0.05% BAC device (0.05%BAC is equal to 0.05grams of alcohol per 100ml of blood).
Australian & New Zealand Customers: The drink driving cut-o for people on a full licence is 50mg
per 100ml of blood. This equates to 0.05%BAC.
This is current as at April 2015. The Australian & NZ Govts. may change this level in the future so
please check before driving.
VIVID
®
AlcoLimit
®