User Manual

Enforcer 3
USAGE
Turning on the power
First, place 2xAA batteries (supplied) into your ALCOLIMIT Enforcer 3 in the
correct direction as marked on the battery cover.
Be sure to use high quality alkaline batteries (preferably Duracell). We
recommend removing the batteries while the unit is in storage to prevent them going flat. High
quality 1.5V Alkaline batteries must be used. Rechargeable batteries will not work as they are
a lower voltage.
Your Enforcer 3 can be operated in two modes:
Normal mode will display digital readings (i.e. 0.032%BAC)
Fast mode will simply display ‘0’, ‘Lo’ or ‘Hi’.
To turn on hold down the on/off button, and you will first see a number
representing the usage counter of the Enforcer 3. Then it will cycle between
and and the usage counter, and so on until you release the on/off
button. (i.e. if you want to use it in normal mode release the on/off button when
is on the screen).
Normal mode is also the default mode of operation when the unit is turned on by
holding the button down briefly.
To operate in normal mode
:
Depress the on/off button for 2 seconds or until appear. The countdown
process will start and countdown from
to .
Insert a mouthpiece into the unit. Once
appears you will hear a double
beep.
pg-5