User Manual

Enforcer 3
SPECIFICATIONS
Usage
Personal / Professional
Sensor Type
Semi-conductor Alcohol Sensor with Gas Flow Sensor built-in
Accuracy
AS3547 Certified accuracy
Calibrated to Australian & NZ legal limit
Range
0.000 – 0.400g / 100mL
Display
LED with Backlight
Usage Monitor
Cumulative test counter on start-up
Warm-up time
< 20 seconds
Breath Sampling Time
3 seconds (approx.) Gas flow sensor means a minimum flow must
be received to get a reading
Time Between Retests
< 4 seconds (Fast mode) < 20 seconds(Normal Mode)
Housing
Shock Resistant Plastic
Weight
115g with batteries
Power Source
2 x 1.5V ‘AA’ Alkaline batteries
Power Usage
Over 200 times
Dimensions
137 x 73 x 44mm
Warranty
1 year manufacturer’s warranty
Recalibration
Workplace use: Monthly
Personal use: 6-12 months
or at least every 200 uses
Recalibration cost $45
Mouthpieces
Enforcer 3 has 5 supplied,
additional available
Specifications are subject to change for the purpose of product improvement.
For all after-sales service and enquiries please contact the manufacturer:
AlcoLimit Breathalysers Pty. Ltd.
P.O. Box 1106
Manly, N.S.W. 1655
Australia
Ph: 1300 667 661 or [phone]
Website: www.alcolimit.com.au
Email: [e-mail]
pg-4