User's Manual

Business Guidelines – Processes and Procedures
Version: 2.3 50 10/15/2009
example, selecting the 3(72 hours) radio button establishes that the client
must wake up the bracelet at least once every 3 days to establish
bracelet/modem communication and upload bracelet data. After 3 days
without any communication between the two devices, a Communication alert
will be generated.
3. Select the SCRAM Modem or Direct Connect as the device being used to
complete the equipment setup process then click the View Steps button to
display the appropriate steps.
a. Using the SCRAM Modem:
1) Verify that the client has an analog phone line.
2) Administer a breathalyzer test to ensure that the client is alcohol
free.
Note: Readings may be skewed if the client has alcohol in their
system and a breathalyzer test is NOT administered.
3) Plug in the SCRAM Modem.
4) Install the battery, faceplate, and exhaust cap.
5) Attach the SCRAM Bracelet.
Note: In order to minimize the possibility of the client removing
the bracelet, it MUST be attached with a proper, snug fit. Regular,
physical inspections of the bracelet are also highly recommended
to ensure the serial number still faces up. If you discover that the
serial number is not facing upwards, promptly notify AMS of the
removal. Once notified, AMS will perform an in-depth analysis of
the data in order to detect and confirm the removal.
6) Insert the tamper clip.
7) Complete SCRAM equipment setup using the SCRAM Modem or
Direct Connect.
b. Using Direct Connect:
1) Verify that the client has an analog phone line.
2) Administer a breathalyzer test to ensure that the client is alcohol
free.
Note: Readings may be skewed if the client has alcohol in their
system and a breathalyzer test is NOT administered.
3) Install the battery, faceplate, and exhaust cap.
4) Attach the SCRAM Bracelet.
5) Insert the tamper clip.
6) Attach the Direct Connect device.