Quick Reference Guide

SCRAM Remote Breath Pro

condential and proprietary to Alcohol Monitoring Systems, Inc. Such information is subject

to change without notice and does not represent any commitment or promise on the part of

Alcohol Monitoring Systems, Inc. Any software described in this document is furnished under a

license agreement. No part of this manual may be reproduced or transmitted in any form or by

any means, electronic or mechanical, including photocopying and recording, for any purposes

without the express written permission of Alcohol Monitoring Systems, Inc.

Please read, understand, and follow all information contained in this manual prior to using the

SCRAM Remote Breath Pro (RB Pro) device. Retain this manual for future reference.

Patents: www.scrampatents.com

Intended Use

The SCRAM Remote Breath Pro device is part of a breath alcohol monitoring system and

transfers data to a computerized monitoring network. This equipment is intended for use on

individuals being monitored by a trained supervising authority.

Health and Safety Notice

WARNING

Improper installation or use of this SCRAM

device may cause injury.

Refer to Health and Safety Notice at www.

scramsafety.com or on SCRAMNET Help page

and follow instructions to avoid injury.

Cleaning

To avoid damaging equipment, use only cleaning and disinfecting products approved by

SCRAM Systems on the SCRAMNET Help page. Never use citrus or pine-based cleaning

products. To avoid contaminating alcohol sensors within SCRAM Systems products, never use

alcohol or alcohol-containing cleaning products.

Battery Warnings

Caution - Contains Li-ion or Li-polymer battery. Do not heat, throw into re, deform, short

circuit, immerse in or wet with water. The battery is not consumer-replaceable and should not

be removed.

To recharge use only the provided SCRAM RB Pro charger.